{"id":13148,"date":"2021-03-16T16:11:51","date_gmt":"2021-03-16T08:11:51","guid":{"rendered":"https:\/\/apk.xunkes.com\/?p=13148"},"modified":"2022-03-14T17:48:26","modified_gmt":"2022-03-14T09:48:26","slug":"users-manual-of-sealing-machine-for-nespresso-k-cups-lavazza-and-others","status":"publish","type":"post","link":"https:\/\/afpakmachine.com\/es\/users-manual-of-sealing-machine-for-nespresso-k-cups-lavazza-and-others\/","title":{"rendered":"MANUAL DE USUARIO DE M\u00c1QUINA SELLADORA PARA NESPRESSO, K CUPS, LAVAZZA Y OTROS"},"content":{"rendered":"

DESKTOP TYPE<\/p>\n

SEALING MACHINE<\/a> For Nespresso, K cups, Lavazza and others<\/h2>\n

BZD95\/ET-99S<\/p>\n

OPERATION MANUAL<\/p>\n

[CARTION: BURN HAZARD]
\nCleaning and maintenance should be performed by
\ntrained personnel only& Keep children away from the machine.<\/p>\n

 <\/p>\n

CONTENT<\/p>\n

\uff082\uff09USING OPERATION<\/p>\n

  (3\uff09I. Daily checkpoint<\/strong> FRONT PANEL INTRODUCTION<\/p>\n

\uff084\uff09ERROR CODE AND SOLUTION<\/p>\n

\uff085\uff09USER’S  MAINTENANCE<\/p>\n

 <\/p>\n

\"user's
user’s operation of sealing machine<\/figcaption><\/figure>\n
\"front
front panel introduction of sealing machine<\/figcaption><\/figure>\n

(10)  Left screen:                                                      <\/strong><\/p>\n

    \n
  1. To display the amount as usual condition and 010.. B. To display the parameter setting. Symbolizing P1-P5.<\/li>\n<\/ol>\n

    III. Function of setting <\/strong><\/p>\n

    System parameter table:<\/p>\n\n\n\n\n\n\n\n\n
    Symbol<\/td>\nFunction setting<\/td>\nRange<\/td>\nParameter Setting<\/p>\n

    (Set in factory)<\/td>\n<\/tr>\n

       P1<\/td>\nSet Temperature<\/td>\nPP(160-180\u2103) ES(140-160\u2103)<\/td>\n160\u2103<\/td>\n<\/tr>\n
    P2<\/td>\nCounter<\/td>\nLOK: LOCK  \/  OPN: UNLOCK<\/td>\nN (can be reset)<\/td>\n<\/tr>\n
    P3<\/td>\nSealing time<\/td>\n001-030 unit (0.1sec~3sec)<\/td>\n010 unit (1sec)<\/td>\n<\/tr>\n
    P4<\/td>\nCup settled time<\/td>\n001-030 unit (0.1sec~3sec)<\/td>\n010 unit (1sec)<\/td>\n<\/tr>\n
    P5<\/td>\nFilm rolling time<\/td>\n000-060 unit (0.0sec~6sec)<\/td>\n000(controlled by sensor)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
      \n
    1. Operating procedures: <\/strong><\/li>\n<\/ol>\n

      The procedures of machine as:  A<\/strong>–>B<\/strong>–>C<\/strong>–>D<\/strong>–>E<\/strong>–>F<\/strong>–>G<\/strong>–>H<\/strong>–>I           <\/strong><\/p>\n

        \n
      1. Press POWER to display HD\/LCC then left screen shows Counter and right<\/li>\n<\/ol>\n

        screen shows  TEMP The machine is now ready for using.                       <\/strong><\/p>\n

          \n
        1. Press SET key, the left screen displays P1 , the right screen display temperature, then us UP or Down key to increase or decrease one degree.<\/li>\n
        2. Press SET key, then the left screen display P2, the right screen shows counting<\/li>\n<\/ol>\n

          mode, OPN means can be reset to zero and recounting from one , LOK means<\/p>\n

          cannot be reset to zero, but continuously counting day after day.                   <\/strong><\/p>\n

            \n
          1. Press SET key once more, the left screen shows P3, and right screen shows<\/li>\n<\/ol>\n

            sealing time, then use UP and Down key to increase or decrease the value by<\/p>\n

            unit (0.1 second). Generally, the value is assigned between 005 and 015.<\/p>\n

              \n
            1. Press SET key once more, the left screen shows P4, and right screen shows cup settling time, then use UP and Down key to increase or the value by one unit (0.1second). Generally, the value is assigned between decrease005and010<\/li>\n
            2. Press SET key once more, the left screen shows P5 , and right screen shows plastic paper advancing time. If the paper has a sensed point (eye mark), then set the value at 000, else depends on the length of the paper unit, and use UP and Down key to adjust th correct time ,generally, is set around 006 and 020.<\/li>\n
            3. Press SET key once again, the left screen shows HD, and right screen shows LCC, means all set procedures are finished. The left display goes to normal counting, and the right display shows the temperature of heater, and going to warm up.<\/li>\n
            4. As the temperature ready, the machine goes to normal working, according to<\/li>\n<\/ol>\n

              AUTO mode or MANUAL mode.<\/p>\n

                \n
              1. To stop the machine, only need to press the POWER key once again, the lower<\/li>\n<\/ol>\n

                mould will draw back; the left and right displays are going off. At the time,<\/p>\n

                the power indicator is still on, and that’s normal. This means the controller is<\/p>\n

                sleeping, press POWER key once again to wake it up if you want to work continuously. To off the power indicator, you need to unplug the power line<\/p>\n

                 <\/p>\n

                  \n
                1. System error codes:<\/strong><\/li>\n<\/ol>\n

                  The machine is going to buzz as the microcomputer detecting any failures.<\/p>\n

                  E00<\/strong>  Temperature control system error.<\/p>\n

                  E01<\/strong>  Heating circuit or temperature wire error.<\/p>\n

                  E02<\/strong>  Upper motor draw back or micro switch error<\/p>\n

                  E03<\/strong>  Lower motor advanced or micro switch error.<\/p>\n

                  E04<\/strong>  Sealing film is not in the right position or the eye-marks not detected.<\/p>\n

                  E05<\/strong>  Lower motor draw back or micro switch error<\/p>\n

                  E06<\/strong>  Upper motor advanced or micro switch error<\/p>\n

                  E07<\/strong>  Safety door is touched or collided.<\/p>\n

                  Err <\/strong> Voltage error.<\/p>\n

                  \"Troubleshoot
                  Troubleshoot of sealing machine 1<\/figcaption><\/figure>\n
                  \"Troubleshoot
                  Troubleshoot of sealing machine 2<\/figcaption><\/figure>\n

                  <4> USER\u2019S MAINTENANCE                          <\/strong><\/p>\n

                  Any time do maintenance, should un-plug the AC power wire.        \uff08Keep both the right and left slider those fixed under the lower mould plate<\/p>\n

                  clean and lubricated, if not, the input and output of r lower mould operation<\/p>\n

                  will be unsmooth.<\/p>\n

                    \n
                  1. Clean the groove of the lower mould.<\/li>\n
                  2. Clean the jack system. (jack slider,spring roller, bearing etc.), keep it operate<\/li>\n<\/ol>\n

                    smoothly.<\/p>\n

                      \n
                    1. Clean the film sensor and lower mould in-out sensor.<\/li>\n<\/ol>\n

                       <\/strong><\/p>\n

                        \n
                      1. Other maintenance and repair placement:<\/strong><\/li>\n<\/ol>\n

                        Please contact with your dealer for service and cooperate wit the maintenance staff.<\/p>\n","protected":false},"excerpt":{"rendered":"

                        DESKTOP TYPE SEALING MACHINE For Nespresso, K cups, Lavazza and others BZD95\/ET-99S OPERATION MANUAL [CARTION: BURN HAZARD] Cleaning and maintenance should be performed by trained personnel only& Keep children away from the machine. CONTENT \uff082\uff09USING OPERATION (3\uff09I. Daily checkpoint FRONT PANEL INTRODUCTION \uff084\uff09ERROR CODE AND SOLUTION \uff085\uff09USER\u2019S MAINTENANCE (10) Left screen: <\/p>\n","protected":false},"author":2,"featured_media":10412,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_gspb_post_css":"","footnotes":""},"categories":[1],"tags":[57,58],"class_list":["post-13148","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-uncategorized","tag-sealing-machine","tag-users-manual"],"acf":[],"_links":{"self":[{"href":"https:\/\/afpakmachine.com\/es\/wp-json\/wp\/v2\/posts\/13148","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/afpakmachine.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/afpakmachine.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/afpakmachine.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/afpakmachine.com\/es\/wp-json\/wp\/v2\/comments?post=13148"}],"version-history":[{"count":0,"href":"https:\/\/afpakmachine.com\/es\/wp-json\/wp\/v2\/posts\/13148\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/afpakmachine.com\/es\/wp-json\/wp\/v2\/media\/10412"}],"wp:attachment":[{"href":"https:\/\/afpakmachine.com\/es\/wp-json\/wp\/v2\/media?parent=13148"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/afpakmachine.com\/es\/wp-json\/wp\/v2\/categories?post=13148"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/afpakmachine.com\/es\/wp-json\/wp\/v2\/tags?post=13148"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}