{"id":20006,"date":"2026-10-05T21:52:42","date_gmt":"2026-10-05T13:52:42","guid":{"rendered":"https:\/\/afpakmachine.com\/?p=20006"},"modified":"2026-10-05T21:52:42","modified_gmt":"2026-10-05T13:52:42","slug":"coffee-capsule-incoming-material-qualification","status":"publish","type":"post","link":"https:\/\/afpakmachine.com\/nl\/coffee-capsule-incoming-material-qualification\/","title":{"rendered":"Kwalificatie van inkomend materiaal voor koffiekapsules: 3 vrijgavebeslissingen"},"content":{"rendered":"<div class=\"seo-blog-content\">\n<p>Coffee capsule incoming material qualification ties a supplier\u2019s material specification to the lot you receive and the filling line that will use it. A clean-looking capsule and a lid that sticks to it are just the beginning. Food-contact suitability, lot consistency and performance at the agreed production speed still need evidence.<\/p>\n<div style=\"margin:24px 0;padding:20px;border-left:3px solid #2d2d2d;background:#f5f5f5;\">\n<p><strong>Coffee capsule incoming material qualification means approving the material identity, checking the delivered lot and proving the intended body-and-lid combination on the selected machine. Keep separate records for each decision.<\/strong><\/p>\n<\/div>\n<div style=\"margin:24px 0;padding:20px;border:1px solid #e0e0e0;\">\n<p><strong>Before releasing a shipment<\/strong><\/p>\n<ul>\n<li>A strong peel result doesn&#8217;t establish a leak-free package.<\/li>\n<li>A supplier certificate must match the material, manufacturer and intended use.<\/li>\n<li>Incoming inspection and a machine trial answer different questions.<\/li>\n<li>Agree the sampling plan and disposition rules before testing the lot.<\/li>\n<\/ul>\n<\/div>\n<h2 id=\"qualification-scope\">What Coffee Capsule Incoming Material Qualification Covers<\/h2>\n<figure style=\"margin:28px 0; text-align:center;\"><img decoding=\"async\" src=\"https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_01.webp\" alt=\"Three approval decisions have separate limits: source, incoming lot and tested production combination.\" class=\"wp-image-19998\" width=\"1200\" height=\"800\" loading=\"lazy\" style=\"max-width:100%; height:auto; border-radius:8px;\" srcset=\"https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_01.webp 1200w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_01-300x200.webp 300w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_01-1024x683.webp 1024w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_01-768x512.webp 768w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_01-18x12.webp 18w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><\/figure>\n<p>When an approved capsule body and sealing lid and other components in an approved pack structure arrive, the buyer must check what lot was delivered, whether it meets the agreed specification and whether it works on the intended equipment. Treat these as separate approvals, with named owners.<\/p>\n<p>Use the <strong>3-Release Evidence Map<\/strong> below when purchasing a new capsule format or changing a supplier. The map is a practical quality management record, not an industry certification. It&#8217;s critical to keep a successful demonstration from becoming blanket approval to use all subsequent shipments.<\/p>\n<p><!-- [QUALIFIED: Editorial buyer method, grounded in NIST lot acceptance and the cited material\/test scopes.] --><\/p>\n<div style=\"overflow-x:auto;margin:24px 0;\">\n<table style=\"width:100%;border-collapse:collapse;min-width:680px;\">\n<caption style=\"text-align:left;padding:12px 0;\"><strong>3-Release Evidence Map<\/strong><\/caption>\n<thead>\n<tr>\n<th scope=\"col\" style=\"padding:12px;text-align:left;vertical-align:top;background:#f5f5f5;border:1px solid #e0e0e0;\">Decision<\/th>\n<th scope=\"col\" style=\"padding:12px;text-align:left;vertical-align:top;background:#f5f5f5;border:1px solid #e0e0e0;\">Evidence to connect<\/th>\n<th scope=\"col\" style=\"padding:12px;text-align:left;vertical-align:top;background:#f5f5f5;border:1px solid #e0e0e0;\">Owner and next action<\/th>\n<th scope=\"col\" style=\"padding:12px;text-align:left;vertical-align:top;background:#f5f5f5;border:1px solid #e0e0e0;\">Limitations<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Approve the material source<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Manufacturer, construction, drawing revision and intended food-contact use<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Quality and procurement approve the specified source<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Does not accept an unidentified delivery<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Release the incoming lot<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Receipt, lot identity, chosen sampling plan and inspection results<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Quality signs the lot disposition<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Does not prove an untested machine combination<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Approve the production combination<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Body lot, lid lot, tooling, process settings and agreed trial results<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Production and quality sign the trial scope<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Does not establish shelf life by itself<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<h3>What evidence should a buyer request before approving a new line?<\/h3>\n<p>A buyer should request identified material samples, agreed acceptance criteria and a trial record linking those samples to the machine setup. Specifications of body and sealing lid, the product to be filled, the fill speed, and the method to evaluate the filled capsule are some of the criteria to be included in the record. A demonstration video can&#8217;t replace the record.<\/p>\n<p>This is important when considering <a href=\"https:\/\/afpakmachine.com\/coffee-capsule-production-line\/\">coffee capsule production lines<\/a>. One line may be able to handle one approved material combination, but a different lid coating or flange shape may require a different setup to work well with the other approved material combination. Supplier approval must be kept available for audit, but the release signature must be specific to the decision being supported.<\/p>\n<h2 id=\"evidence-pack\">Build a Lot-Specific Evidence Pack<\/h2>\n<figure style=\"margin:28px 0; text-align:center;\"><img decoding=\"async\" src=\"https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_02.webp\" alt=\"Link identity, specification, food-contact evidence, inspection and change control to one received lot.\" class=\"wp-image-19999\" width=\"1200\" height=\"800\" loading=\"lazy\" style=\"max-width:100%; height:auto; border-radius:8px;\" srcset=\"https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_02.webp 1200w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_02-300x200.webp 300w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_02-1024x683.webp 1024w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_02-768x512.webp 768w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_02-18x12.webp 18w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><\/figure>\n<p>A lot-specific evidence pack connects the purchase order, supplier identity, material revision, and inspection results to the same shipment. Start with the approved drawing and material construction. Then confirm that the delivered labels and supporting records refer to those versions, rather than a similar capsule sold under the same trade name.<\/p>\n<p>The <a href=\"https:\/\/www.fda.gov\/food\/packaging-food-contact-substances-fcs\/determining-regulatory-status-components-food-contact-material\" rel=\"nofollow noopener\" target=\"_blank\">FDA\u2019s guidance for food-contact materials<\/a> for the U.S. project states why the identity and intended use of a plastic food contact material matter.  An effective Food Contact Substance Notification is tied to the identified manufacturer, substance and conditions of use.  Determine if dry coffee storage and the contact with hot water are the functions for which the food contact material is intended. A statement that a plastic is \u201cfood grade\u201d does not establish that connection.<\/p>\n<p>For plastic food contact materials within its scope, the <a href=\"https:\/\/food.ec.europa.eu\/food-safety\/chemical-safety\/food-contact-materials\/legislation_en\" rel=\"nofollow noopener\" target=\"_blank\"> European Commission\u2019s legislation overview<\/a> describes a Declaration of Compliance and accompanying evidence. Make inquiries as to what the intended use covers. Hot brewing is not the same process as hot-fill packaging, and a room-temperature use statement should not be silently extended to every beverage application.<\/p>\n<ul>\n<li><strong>Identity:<\/strong> supplier, actual manufacturer, material code, lot or batch number and receipt date.<\/li>\n<li><strong>Specification:<\/strong> controlled drawing, material formulation or construction identifier, sealing layer and approved revision.<\/li>\n<li><strong>Evidence:<\/strong> applicable food-contact statement, certificate or test report, with the relevant use restrictions.<\/li>\n<li><strong>Inspection:<\/strong> method, sample identity, equipment used, results, inspector and disposition.<\/li>\n<li><strong>Change control:<\/strong> contact person, notification agreement and approval required before substitution.<\/li>\n<\/ul>\n<h3>What information do batch numbers typically include?<\/h3>\n<p>A batch number identifies a defined production group; its characters may encode a date, line, or other supplier information, but there&#8217;s no universal format. Confirm the records the supplier retrieves and ask them to explain the code. The receiving record should retain the original identifier, even if the buyer assigns an internal stock code.<\/p>\n<p>Body and lid batches can differ. Record them, and then link them to the final-product batch. Different SKUs can share a capsule body and use different lids. Preserve that distinction. Later, during a recall, affected materials can be identified. A quality system loses traceability if an original identifier is replaced with a single product description like \u201ccompatible aluminum capsule.\u201d<\/p>\n<p>Standardize the receiving form before trying to automate its entries. Quality control still requires someone to make the decision. A database that copies a mistaken material code more quickly doesn&#8217;t fix an identity crisis.<\/p>\n<h2 id=\"incoming-checks\">Check Capsule Bodies, Lids and Handling Before Filling<\/h2>\n<figure style=\"margin:28px 0; text-align:center;\"><img decoding=\"async\" src=\"https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_03.webp\" alt=\"Ten incoming checks cover body, lid, handling and traceability; apply the approved drawing and design.\" class=\"wp-image-20000\" width=\"1200\" height=\"800\" loading=\"lazy\" style=\"max-width:100%; height:auto; border-radius:8px;\" srcset=\"https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_03.webp 1200w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_03-300x200.webp 300w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_03-1024x683.webp 1024w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_03-768x512.webp 768w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_03-18x12.webp 18w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><\/figure>\n<p>Incoming checks should follow the approved capsule structure and machine interfaces that can stop a process or damage a seal. Check dimensions with the controlled drawing. Inspect the sealing surface and check feeding behavior. Record the outcome and the method. A tick by \u201cappearance acceptable\u201d leaves too much unexplained in case of a failed trial.<\/p>\n<p>Build the receiving sheet around applicable parts. According to <a href=\"https:\/\/afpakmachine.com\/nespresso-coffee-capsule-filling-sealing-machine\/\">AFPAK&#8217;s Nespresso-compatible filling machine page<\/a>, samples of customers&#8217; capsules and lids, as well as coffee, are to be tested prior to confirming the setup. The <a href=\"https:\/\/afpakmachine.com\/dolce-gusto-filling-sealing-machines\/\">Dolce Gusto-compatible equipment<\/a> by AFPAK also uses inner- and top-film arrangements where the pack structure requires them. In a top-only design, don&#8217;t add an inner-film requirement.<\/p>\n<p><!-- [SPEC-DB: afpak] [WEBSEARCH: https:\/\/afpakmachine.com\/nespresso-coffee-capsule-filling-sealing-machine\/] --><\/p>\n<div style=\"overflow-x:auto;margin:24px 0;\">\n<table style=\"width:100%;border-collapse:collapse;min-width:760px;\">\n<caption style=\"text-align:left;padding:12px 0;\"><strong>Incoming capsule material inspection record<\/strong><\/caption>\n<thead>\n<tr>\n<th scope=\"col\" style=\"padding:12px;text-align:left;vertical-align:top;background:#f5f5f5;border:1px solid #e0e0e0;\">Item<\/th>\n<th scope=\"col\" style=\"padding:12px;text-align:left;vertical-align:top;background:#f5f5f5;border:1px solid #e0e0e0;\">What to record<\/th>\n<th scope=\"col\" style=\"padding:12px;text-align:left;vertical-align:top;background:#f5f5f5;border:1px solid #e0e0e0;\">Why production needs it<\/th>\n<th scope=\"col\" style=\"padding:12px;text-align:left;vertical-align:top;background:#f5f5f5;border:1px solid #e0e0e0;\">Limitations \/ hold condition<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Shipping container<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Label, lot, damage, contamination and storage history available<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Preserves identity before unpacking<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Unidentified mixed stock stays on hold<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Capsule body<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Material code and drawing revision<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Links the sample to the approved design<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Trade name alone cannot confirm construction<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Body geometry<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Drawing-controlled dimensions in mm and measuring method<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Checks seating and tooling interfaces<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Use agreed tolerances; no universal capsule tolerance<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Flange<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Flatness, damage and usable sealing surface<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Identifies a possible sealing mismatch<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Appearance does not prove seal integrity<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Stacking and feeding<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Sticking, nesting, orientation and observed handling problems<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Separates a feeding fault from a filling fault<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Hand feeding does not qualify automatic feeding<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Pre-cut lid<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Diameter, shape, orientation and sealing-side identity<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Checks placement and contact with the flange<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Correct diameter does not prove coating compatibility<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Roll film<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Width, winding direction, splice identity and approved artwork<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Checks the actual unwind and cutting arrangement<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Not applicable to a pre-cut-only line<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Inner film or filter<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Part code, orientation and specified construction<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Prevents substitution within a multi-part pack<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Include only when the approved design needs it<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Material condition<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Supplier storage instructions, damage and suspect exposure<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Allows investigation before sealing trials<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">A clean outer carton does not prove inner material condition<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Retained samples<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Body\/lid lot IDs, storage location and retention rule<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Supports investigation of later deviation<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Retention does not replace representative sampling<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>An illustrative receiving example: A replacement lid is delivered that has the correct diameter and artwork, but its sealing layer revision is missing from the delivery record. Production wants to use it as the next job is scheduled. The correct response is to quarantine that lot, ask procurement to obtain the revision and to let quality compare it to the approved sample. Turning up the sealing temperature first would obscure whether the problem came from material identity or process adjustment.<\/p>\n<p>A packaging redesign requires the same level of detail. Depending on which body, lid, filter or outer wrapper is changed, the checks may vary. If the approved pack uses a printed sleeve, list its identity in the receiving record without considering it a sealing component. Keep the checklist specific enough so an inspector can mark a row \u201cnot applicable\u201d with a reason instead of treating every capsule format as the same.<\/p>\n<h2 id=\"test-evidence\">Separate Seal Strength, Leakage and Barrier Evidence<\/h2>\n<figure style=\"margin:28px 0; text-align:center;\"><img decoding=\"async\" src=\"https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_04.webp\" alt=\"Seal strength, leak, barrier and headspace tests answer four different questions; ASTM and MOCON scopes.\" class=\"wp-image-20001\" width=\"1200\" height=\"800\" loading=\"lazy\" style=\"max-width:100%; height:auto; border-radius:8px;\" srcset=\"https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_04.webp 1200w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_04-300x200.webp 300w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_04-1024x683.webp 1024w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_04-768x512.webp 768w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_04-18x12.webp 18w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><\/figure>\n<p>Seal strength, package leakage, barrier transmission and residual headspace oxygen address different questions. Select the method that addresses the property being evaluated and maintain the test conditions. A peel-force result describes mechanical separation; it cannot substitute for a leak measurement or establish how the packaged coffee will age during storage.<\/p>\n<p><a href=\"https:\/\/store.astm.org\/f0088_f0088m-23.html\" rel=\"nofollow noopener\" target=\"_blank\">ASTM F88\/F88M-23<\/a> measures the force needed to separate a strip containing the seal and records its failure mode. It can test seals between flexible material and flexible, rigid or semi-rigid materials. <a href=\"https:\/\/store.astm.org\/f2824-10r25.html\" rel=\"nofollow noopener\" target=\"_blank\">ASTM F2824-10(2025)<\/a> on the other hand describes the removal of an entire peelable lid from a rigid or semi-rigid round container. Select by geometry and purpose and not by the standard number appearing in a supplier brochure.<\/p>\n<div style=\"overflow-x:auto;margin:24px 0;\">\n<table style=\"width:100%;border-collapse:collapse;min-width:720px;\">\n<caption style=\"text-align:left;padding:12px 0;\"><strong>Four test questions to keep separate<\/strong><\/caption>\n<thead>\n<tr>\n<th scope=\"col\" style=\"padding:12px;text-align:left;vertical-align:top;background:#f5f5f5;border:1px solid #e0e0e0;\">Question<\/th>\n<th scope=\"col\" style=\"padding:12px;text-align:left;vertical-align:top;background:#f5f5f5;border:1px solid #e0e0e0;\">Evidence to request<\/th>\n<th scope=\"col\" style=\"padding:12px;text-align:left;vertical-align:top;background:#f5f5f5;border:1px solid #e0e0e0;\">Essential report context<\/th>\n<th scope=\"col\" style=\"padding:12px;text-align:left;vertical-align:top;background:#f5f5f5;border:1px solid #e0e0e0;\">What it does not establish<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">How does the seal separate?<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Suitable peel\/strength method and failure mode<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Strip or whole lid, fixture, pull angle, force units<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Absence of a leak path<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Does the package leak under the test conditions?<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Validated leak method suited to the pack<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Test settings, conditioning and demonstrated detection capability<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Long-term oxygen transmission through intact material<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">How much gas or vapor passes through the barrier?<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Oxygen or water-vapor transmission report<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Film\/body\/whole pack, area basis, temperature and humidity<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Residual oxygen left after filling<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">What oxygen remains in the filled capsule?<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Headspace oxygen result at an agreed time<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Sampling method, elapsed time and reported concentration<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">The finished product&#8217;s shelf life<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>An example: a force reported in N for a complete lid should not be compared directly to a strip result, for example, per unit width. Ask the lab to resolve the method difference before reaching a conclusion that a supplier\u2019s seal is stronger. ASTM F2824 describes a 45\u00b0 pull angle; other angles require the documented procedure be validated. The angle described is a test detail; not the setting of the sealing machine.<\/p>\n<p>Record if a transmission result is for flat film, an empty body or a completely sealed package. Keep units and conditions as stated. A number without a specimen description can&#8217;t be compared to other numbers and offers.<\/p>\n<p>The commercial concern is straightforward: a lower material cost can lose its advantage when evidence can&#8217;t be compared; a statement that a capsule can withstand brewing conditions requires a defined test, not a general durability statement. Quality should agree to the report format with the supplier and test service provider before procurement treats different results as equivalent.<\/p>\n<h2 id=\"sampling-release\">Set Sampling and Release Rules Before the Shipment<\/h2>\n<figure style=\"margin:28px 0; text-align:center;\"><img decoding=\"async\" src=\"https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_05.webp\" alt=\"Supplier demonstration samples do not automatically represent a later receiving lot; NIST sampling guidance.\" class=\"wp-image-20002\" width=\"1200\" height=\"800\" loading=\"lazy\" style=\"max-width:100%; height:auto; border-radius:8px;\" srcset=\"https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_05.webp 1200w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_05-300x200.webp 300w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_05-1024x683.webp 1024w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_05-768x512.webp 768w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_05-18x12.webp 18w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><\/figure>\n<p>A receiving sampling plan describes the lot and specifies inspection characteristics, sampling method, and defines the acceptance level, before samples are taken. Counted defects and measured properties must be separated. The plan must also fit the supply history: continuing deliveries and an isolated first order do not automatically justify the same sampling arrangement.<\/p>\n<p><a href=\"https:\/\/asq.org\/quality-resources\/z14-z19\" rel=\"nofollow noopener\" target=\"_blank\">ASQ describes Z1.4 and Z1.9<\/a> as different acceptance-sampling systems. Z1.4 deals with attributes and assumes a specified Acceptance Quality Limit and switching rules for subsequent lots. Z1.9, on the other hand, deals with variables and assumes a normally distributed measurement. Neither overview determines the appropriate sample size for your shipment.<\/p>\n<p>For an isolated order or a short series where switching rules cannot apply, the scope of <a href=\"https:\/\/www.iso.org\/standard\/64505.html\" rel=\"nofollow noopener\" target=\"_blank\">ISO 2859-2:2020<\/a> is relevant to discuss with the quality lead. <a href=\"https:\/\/www.itl.nist.gov\/div898\/handbook\/pmc\/section2\/pmc22.htm\" rel=\"nofollow noopener\" target=\"_blank\">NIST&#8217;s acceptance-sampling guidance<\/a> also distinguishes supplier and buyer risk. An agreed Quality Limit does not guarantee that all lots accepted against that limit will have less than that percentage of defective units.<\/p>\n<ol>\n<li>Define what counts as a lot and prevent mixing during inspection.<\/li>\n<li>Classify defects by their consequence for the actual product and process.<\/li>\n<li>Choose and document the sampling basis, including destructive tests.<\/li>\n<li>Set acceptance, rejection and escalation rules before seeing results.<\/li>\n<li>Specify retained samples, retest authority and the release signature.<\/li>\n<\/ol>\n<p>For a first-order sample, procurement may receive a small packet of samples from the supplier before the production shipment exists. These samples may be used to assess fit and plan a trial. These samples are not automatically a random receiving sample from the later lot, and the trial should be viewed provisionally. The samples shouldn&#8217;t be viewed as lot approval until the lot has been identified, inspected and given a recorded acceptance decision.<\/p>\n<p>Agree who pays for the investigation, replacement material and another trial if the results exceed a limit or fall outside the signed spec. Clear rejection and escalation rules help reduce risk without claiming to eliminate sampling uncertainty.<\/p>\n<h2 id=\"machine-trial\">Run a Controlled Material-to-Machine Trial<\/h2>\n<figure style=\"margin:28px 0; text-align:center;\"><img decoding=\"async\" src=\"https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_06.webp\" alt=\"Identify body and lid lots, coffee, tooling and settings for the machine trial; ASTM F2029 limits lab inference.\" class=\"wp-image-20003\" width=\"1200\" height=\"800\" loading=\"lazy\" style=\"max-width:100%; height:auto; border-radius:8px;\" srcset=\"https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_06.webp 1200w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_06-300x200.webp 300w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_06-1024x683.webp 1024w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_06-768x512.webp 768w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_06-18x12.webp 18w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><\/figure>\n<p>A controlled material-to-machine trial evaluates the combination of body and lid under an agreed production condition. Keep the coffee, tooling, settings and test methods traceable to each result. First, consider the supplier evidence and then verify performance on the specified equipment, rather than treating a laboratory sealing curve as finished production approval.<\/p>\n<p><a href=\"https:\/\/store.astm.org\/f2029-16r21.html\" rel=\"nofollow noopener\" target=\"_blank\">ASTM F2029-16(2021)<\/a> mentions that laboratory and manufacturing sealers may vary in sealing area, scale, and speed. The heat-seal study serves as a production condition baseline.<\/p>\n<blockquote style=\"margin:24px 0;padding:16px 24px;border-left:3px solid #2d2d2d;background:#f5f5f5;\">\n<p>\u201cIt does not cover the required validation procedures for the production equipment.\u201d<\/p>\n<footer> ASTM F2029-16(2021), public Scope 1.1<\/footer>\n<\/blockquote>\n<p>Use the actual ground coffee and specified pack components. A description of the coffee beans alone doesn&#8217;t define the actual product being used in the trial. List the target fill weight in g, and the agreed speed in capsules\/min. Seal settings are to be described with their units. For settings, distinguish what was measured from what the controller is set to. If a setting is changed, indicate this and separate the results before and after the setting change.<\/p>\n<p>List the product variants proposed for testing. If flavoring or ingredients associated with food allergens are present, have the food safety lead determine the requirements for safe handling. Don&#8217;t think that a material qualification form replaces those requirements. An on-site trial and a supplier demonstration should use the same agreed upon identifiers and report fields.<\/p>\n<p><!-- [SPEC-DB: afpak] --><\/p>\n<p>AFPAK&#8217;s production-line page lists HB210, HB410 and HB610 arrangements with 2, 4 and 6 filling lanes and 4, 8 and 12 sealing heads, respectively. Those published arrangements show why a trial record needs lane and sealing station identities. They aren&#8217;t evidence that every lane passed your material trial. Confirm the exact purchased machine arrangement before drafting the test sheet.<\/p>\n<ul>\n<li>Check feeding and seating before attributing a stop to dosing.<\/li>\n<li>Record filling consistency and the condition of the flange before sealing.<\/li>\n<li>Apply the agreed strength, leak and gas checks to identified trial samples.<\/li>\n<li>Evaluate the required brewing\/extraction behavior separately from storage evidence.<\/li>\n<li>Record start-up, restart and any planned operating conditions in the signed trial scope.<\/li>\n<\/ul>\n<p>In the case of switching from pre-cut lids to roll film, the trial must cover unwind, registration and cut, as well. AFPAK\u2019s <a href=\"https:\/\/afpakmachine.com\/k-cup-sealing-machine-foil-vs-roll-film-vs-precut\/\">guide to foil, roll film and pre-cut sealing<\/a> may be of assistance with the equipment discussion. The approval should identify the combination that was tested, rather than say \u201call compatible lids approved.\u201d<\/p>\n<h2 id=\"hold-change-control\">Quarantine Failures and Control Material Changes<\/h2>\n<figure style=\"margin:28px 0; text-align:center;\"><img decoding=\"async\" src=\"https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_07.webp\" alt=\"Illustrative BODY-A and LID-B case stays on HOLD because the lid sealing-layer revision is missing.\" class=\"wp-image-20004\" width=\"1200\" height=\"800\" loading=\"lazy\" style=\"max-width:100%; height:auto; border-radius:8px;\" srcset=\"https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_07.webp 1200w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_07-300x200.webp 300w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_07-1024x683.webp 1024w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_07-768x512.webp 768w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_07-18x12.webp 18w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><\/figure>\n<p>A failed or incomplete incoming record requires a hold decision, marked sample, and an investigation. Separate missing evidence from measured nonconformances. Both may prevent release, but they require different corrective actions. Don&#8217;t delete that distinction by retesting until a favorable result is shown.<\/p>\n<p>The illustration that follows uses fictitious identifiers BODY-A and LID-B, not AFPAK customer data. The body drawing is available; however, the revision of the lid\u2019s sealing layer isn&#8217;t available. The correct result is a hold on the combination, even if a few samples that were sealed manually look acceptable.<\/p>\n<p><!-- [SCENARIO-SYNTH] [QUALIFIED: Illustrative disposition record, not a customer test report.] --><\/p>\n<div style=\"overflow-x:auto;margin:24px 0;\">\n<table style=\"width:100%;border-collapse:collapse;min-width:690px;\">\n<caption style=\"text-align:left;padding:12px 0;\"><strong>Filled example: a lid lot remains on hold<\/strong><\/caption>\n<thead>\n<tr>\n<th scope=\"col\" style=\"padding:12px;text-align:left;vertical-align:top;background:#f5f5f5;border:1px solid #e0e0e0;\">Record field<\/th>\n<th scope=\"col\" style=\"padding:12px;text-align:left;vertical-align:top;background:#f5f5f5;border:1px solid #e0e0e0;\">Example entry<\/th>\n<th scope=\"col\" style=\"padding:12px;text-align:left;vertical-align:top;background:#f5f5f5;border:1px solid #e0e0e0;\">Responsible next action<\/th>\n<th scope=\"col\" style=\"padding:12px;text-align:left;vertical-align:top;background:#f5f5f5;border:1px solid #e0e0e0;\">Release boundary<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Body identity<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">BODY-A; drawing D07 revision C received<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Quality confirms match to received labels<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Does not identify the lid<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Lid identity<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">LID-B; sealing-layer revision absent<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Procurement obtains the controlled construction record<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Combination remains HOLD<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Trial status<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Not approved for scheduled production<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Production preserves proposed setup and sample IDs<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Appearance-only trial is insufficient<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Verification<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Pending comparison with approved material<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Quality defines whether additional testing is needed<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">No automatic release after an email arrives<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Commercial response<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Replacement\/retest responsibility to be resolved<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Buyer and supplier apply the purchase agreement<\/td>\n<td style=\"padding:12px;vertical-align:top;border:1px solid #e0e0e0;\">Schedule pressure does not change the result<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>A material change warrants a new review, even if the outer dimensions stay the same. In its <a href=\"https:\/\/www.packworld.com\/sustainable-packaging\/bio-based\/article\/22945340\/compostable-capsules-for-nespresso-original-line-systems\" rel=\"nofollow noopener\" target=\"_blank\">July 2025 Metropolis Coffee report<\/a>, Packaging World mentions a compostable body and a lid with separate sealing, barrier and filtering functions. This is a third party (packaging) case, and not related to AFPAK. This illustrates that replacing \u201cjust the lid\u201d can include more than one performance requirement.<\/p>\n<h3>When should a material lot stay on hold?<\/h3>\n<p>A material lot should remain on hold when its identity is undetermined, required evidence is lacking, or an agreed acceptance criterion isn&#8217;t met. Identify which of the three is the case. For a suspected sealing problem, retained samples of body and lid should be held as well as measured results and set machine parameters before the process is changed or the shipment is returned.<\/p>\n<p>Useful lines of investigation include change to wrong material, damaged flange, contamination present at the interface and a test method that doesn&#8217;t match the claimed result. With respect to a brewing complaint, determine if water escaped during extraction, or if a drip was seen after opening the machine. These observations aren&#8217;t interchangeable.  Assign each branch to the supplier, quality team or production team. AFPAK&#8217;s article on <a href=\"https:\/\/afpakmachine.com\/why-your-coffee-capsule-seals-may-be-failing-and-what-its-really-costing-you\/\">coffee capsule seal failures<\/a> covers the troubleshooting topic separately; incoming qualification should keep the evidence needed to investigate it.<\/p>\n<p>A new approach to sustainability can involve different raw materials and a different sealing layer. Put that change through the agreed review even if the supplier retains the same product name. Environmental positioning doesn&#8217;t answer the mechanical or food-contact questions.<\/p>\n<h2 id=\"trial-request\">Prepare the Supplier Trial Request<\/h2>\n<figure style=\"margin:28px 0; text-align:center;\"><img decoding=\"async\" src=\"https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_08.webp\" alt=\"Send six scoped inputs for the supplier trial and label demonstration samples; AFPAK request and NIST boundaries.\" class=\"wp-image-20005\" width=\"1200\" height=\"800\" loading=\"lazy\" style=\"max-width:100%; height:auto; border-radius:8px;\" srcset=\"https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_08.webp 1200w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_08-300x200.webp 300w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_08-1024x683.webp 1024w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_08-768x512.webp 768w, https:\/\/afpakmachine.com\/wp-content\/uploads\/2026\/10\/coffee-capsule-incoming-material-qualification-h2_08-18x12.webp 18w\" sizes=\"auto, (max-width: 1200px) 100vw, 1200px\" \/><\/figure>\n<p>The ideal supplier trial request specifies the material and proposed use, and identifies the decision the trial must help clarify.  Label demonstration samples as demonstration samples. This gives the supplier the opportunity to scope the test appropriately. Sample size is determined after the scope of testing and destruction, repetition, and retained samples are agreed to; a defensible, universal sample size for every case doesn&#8217;t exist.<\/p>\n<p><a href=\"https:\/\/www.itl.nist.gov\/div898\/handbook\/pmc\/section2\/pmc21.htm\" rel=\"nofollow noopener\" target=\"_blank\">NIST distinguishes lot acceptance from estimating lot quality<\/a>. Separately, <a href=\"https:\/\/www.fda.gov\/regulatory-information\/search-fda-guidance-documents\/guidance-industry-preparation-premarket-submissions-food-contact-substances-chemistry\" rel=\"nofollow noopener\" target=\"_blank\">FDA&#8217;s food-contact chemistry recommendations<\/a> tie test specimens and exposure conditions to the intended use; those recommendations do not suggest a machine trial.<\/p>\n<div style=\"padding:20px;border:1px solid #e0e0e0;background:#f5f5f5;\">\n<p><strong>Trial request checklist<\/strong><\/p>\n<ul>\n<li>Body and lid drawings, construction\/revision and lot identifiers.<\/li>\n<li>Applicable inner film, filter and packaging components.<\/li>\n<li>Coffee type, target fill weight and any relevant product variation.<\/li>\n<li>Selected machine, tooling, target speed and automatic feeding arrangement.<\/li>\n<li>Destination market, storage and brewing conditions.<\/li>\n<li>Agreed tests, decision criteria, report format and release owner.<\/li>\n<\/ul>\n<\/div>\n<p>The pack is sent to AFPAK with the proposed production requirements. AFPAK is instructed to confirm the material samples and the scope of the trial prior to finalization of the machine set-up. Maintain the decisions to release the material, approve the trial, and set the shelf life of the finished coffee as separate signed documents.<\/p>\n<h2 id=\"faq\">Frequently Asked Questions<\/h2>\n<h3>What is the difference between a batch number and a lot number?<\/h3>\n<details>\n<summary>Both identify a defined group, but the supplier&#8217;s coding rules determine the exact meaning.<\/summary>\n<p>A batch commonly describes a production run, while a lot may describe a group controlled for production or shipment. Suppliers can use the terms interchangeably. Ask what the identifier retrieves and whether different manufacturing runs can share a shipment. Keep body and lid identifiers separate in receiving records, then link both to the finished coffee batch so an investigation can trace the correct materials.<\/p>\n<\/details>\n<h3>What is the difference between a batch number and a serial number?<\/h3>\n<details>\n<summary>A batch number identifies a group; a serial number identifies an individual item.<\/summary>\n<p>The distinction is useful in a machine trial. The equipment serial number identifies the machine, while the capsule and lid batch numbers identify the materials used. Neither replaces the other. Record the tooling or station identifier where relevant, too. A later auditor should be able to connect the physical machine, material lots and test report without relying on someone&#8217;s memory of the demonstration.<\/p>\n<\/details>\n<h3>Can third-party compatible capsules run on the same filling machine?<\/h3>\n<details>\n<summary>Possibly, but compatibility requires checking the actual capsule, lid and machine arrangement.<\/summary>\n<p>A claim that a capsule works in a particular consumer brewer doesn&#8217;t prove that it will feed, seat, fill and seal on a specific production line. Compare the drawings and material construction, then test representative samples with the proposed tooling and settings. AFPAK asks for actual capsule, lid and coffee samples before confirming a setup. Keep the approval limited to the combination tested.<\/p>\n<\/details>\n<h3>Is a supplier certificate enough to release an incoming lot?<\/h3>\n<details>\n<summary>A certificate is one part of the evidence pack, not automatic permission to release.<\/summary>\n<p>Check its product identity, manufacturer, revision, scope and intended use. Then apply the agreed receiving inspection and release rules to the actual shipment. A certificate for another material or use can&#8217;t close the gap.<\/p>\n<\/details>\n<h3>How many capsules should be sampled from each delivery?<\/h3>\n<details>\n<summary>The sample count must come from the agreed plan and the lot being evaluated.<\/summary>\n<p>Define the lot, defect classes, inspection method and acceptance rules first. Consider whether the supply is a continuing series or an isolated order and whether testing destroys the samples. The quality lead should choose the plan with the supplier and test provider. A number copied from another factory may produce a different buyer risk and may not cover the same material or failure mode.<\/p>\n<\/details>\n<h3>Does a strong seal mean the capsule has no leaks?<\/h3>\n<details>\n<summary>No. Peel strength and leak integrity are different properties.<\/summary>\n<p>A strong portion of a seal can coexist with a defect elsewhere. Use the agreed leak test for the actual package and keep its conditions with the result.<\/p>\n<\/details>\n<h3>Can incoming inspection establish the coffee&#8217;s shelf life?<\/h3>\n<details>\n<summary>No. Incoming inspection alone cannot establish finished-product shelf life.<\/summary>\n<p>Incoming results help confirm the materials entering production. Shelf-life evaluation concerns the filled product and its actual pack, process, storage and distribution conditions. Keep barrier evidence, residual oxygen, seal integrity and product-quality observations distinct. A capsule that meets a drawing or passes a peel test hasn&#8217;t, by that result alone, demonstrated that its coffee will remain acceptable throughout the proposed storage period.<\/p>\n<\/details>\n<div style=\"margin:32px 0;padding:24px;border-top:3px solid #2d2d2d;background:#f5f5f5;\">\n<h3>Discuss the material combination before choosing the line<\/h3>\n<p>Prepare your capsule and lid specifications, coffee details and trial objectives. Review AFPAK&#8217;s <a href=\"https:\/\/afpakmachine.com\/coffee-capsule-production-line\/\">production-line options<\/a> with that evidence pack so the machine discussion starts with the materials you intend to run.<\/p>\n<\/div>\n<p style=\"color:#6b7280;\">The guide has used public technical sources and AFPAK\u2019s published product information. Illustrative examples of the filled hold records are provided. Acceptance limits, test selection and requirements of the market must be set for the actual material and product of interest to the project.<\/p>\n<div style=\"margin:32px 0;padding:24px;border:1px solid #e0e0e0;background:#f5f5f5;\">\n<h3>References &amp; Sources<\/h3>\n<ol>\n<li><a href=\"https:\/\/www.fda.gov\/food\/packaging-food-contact-substances-fcs\/determining-regulatory-status-components-food-contact-material\" rel=\"nofollow noopener\" target=\"_blank\">Determining the Regulatory Status of Components of a Food Contact Material<\/a> U.S. Food and Drug Administration.<\/li>\n<li><a href=\"https:\/\/food.ec.europa.eu\/food-safety\/chemical-safety\/food-contact-materials\/legislation_en\" rel=\"nofollow noopener\" target=\"_blank\">Food Contact Materials: Legislation<\/a> European Commission.<\/li>\n<li><a href=\"https:\/\/store.astm.org\/f0088_f0088m-23.html\" rel=\"nofollow noopener\" target=\"_blank\">F88\/F88M-23: Seal Strength of Flexible Barrier Materials<\/a> ASTM International, public scope.<\/li>\n<li><a href=\"https:\/\/store.astm.org\/f2824-10r25.html\" rel=\"nofollow noopener\" target=\"_blank\">F2824-10(2025): Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids<\/a> ASTM International, public scope.<\/li>\n<li><a href=\"https:\/\/asq.org\/quality-resources\/z14-z19\" rel=\"nofollow noopener\" target=\"_blank\">ASQ\/ANSI Quality Standards Z1.4 &amp; Z1.9<\/a> American Society for Quality.<\/li>\n<li><a href=\"https:\/\/www.iso.org\/standard\/64505.html\" rel=\"nofollow noopener\" target=\"_blank\">ISO 2859-2:2020: Sampling Plans for Isolated Lot Inspection<\/a> International Organization for Standardization, public abstract.<\/li>\n<li><a href=\"https:\/\/www.itl.nist.gov\/div898\/handbook\/pmc\/section2\/pmc22.htm\" rel=\"nofollow noopener\" target=\"_blank\">What Kinds of Lot Acceptance Sampling Plans Are There?<\/a> National Institute of Standards and Technology, section 6.2.2.<\/li>\n<li><a href=\"https:\/\/store.astm.org\/f2029-16r21.html\" rel=\"nofollow noopener\" target=\"_blank\">F2029-16(2021): Making Laboratory Heat Seals<\/a> ASTM International, public scope and significance.<\/li>\n<li><a href=\"https:\/\/www.packworld.com\/sustainable-packaging\/bio-based\/article\/22945340\/compostable-capsules-for-nespresso-original-line-systems\" rel=\"nofollow noopener\" target=\"_blank\">Compostable Capsules for Nespresso Original Line Systems<\/a> Pat Reynolds, Packaging World, July 11, 2025.<\/li>\n<li><a href=\"https:\/\/www.itl.nist.gov\/div898\/handbook\/pmc\/section2\/pmc21.htm\" rel=\"nofollow noopener\" target=\"_blank\">What Is Acceptance Sampling?<\/a> National Institute of Standards and Technology, section 6.2.1.<\/li>\n<li><a href=\"https:\/\/www.fda.gov\/regulatory-information\/search-fda-guidance-documents\/guidance-industry-preparation-premarket-submissions-food-contact-substances-chemistry\" rel=\"nofollow noopener\" target=\"_blank\">Preparation of Premarket Submissions for Food Contact Substances: Chemistry Recommendations<\/a> U.S. Food and Drug Administration.<\/li>\n<\/ol>\n<\/div>\n<div style=\"margin:32px 0;\">\n<h3>Related Articles<\/h3>\n<ul>\n<li><a href=\"https:\/\/afpakmachine.com\/why-your-coffee-capsule-seals-may-be-failing-and-what-its-really-costing-you\/\">Understanding coffee capsule seal failures<\/a><\/li>\n<li><a href=\"https:\/\/afpakmachine.com\/k-cup-sealing-machine-foil-vs-roll-film-vs-precut\/\">Comparing foil, roll film and pre-cut lids<\/a><\/li>\n<li><a href=\"https:\/\/afpakmachine.com\/empty-capsules-and-sealing-lids\/\">Empty capsules and sealing lids<\/a><\/li>\n<\/ul>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>Coffee capsule incoming material qualification ties a supplier\u2019s material specification to the lot you receive and the filling line that will use it. A clean-looking capsule and a lid that sticks to it are just the beginning. Food-contact suitability, lot consistency and performance at the agreed production speed still need evidence. Coffee capsule incoming material [&hellip;]<\/p>\n","protected":false},"author":5,"featured_media":19997,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_gspb_post_css":"","footnotes":""},"categories":[80],"tags":[],"class_list":["post-20006","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-afpak-coffee-capsule-filling-sealing-machines-news"],"acf":[],"_links":{"self":[{"href":"https:\/\/afpakmachine.com\/nl\/wp-json\/wp\/v2\/posts\/20006","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/afpakmachine.com\/nl\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/afpakmachine.com\/nl\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/afpakmachine.com\/nl\/wp-json\/wp\/v2\/users\/5"}],"replies":[{"embeddable":true,"href":"https:\/\/afpakmachine.com\/nl\/wp-json\/wp\/v2\/comments?post=20006"}],"version-history":[{"count":1,"href":"https:\/\/afpakmachine.com\/nl\/wp-json\/wp\/v2\/posts\/20006\/revisions"}],"predecessor-version":[{"id":20008,"href":"https:\/\/afpakmachine.com\/nl\/wp-json\/wp\/v2\/posts\/20006\/revisions\/20008"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/afpakmachine.com\/nl\/wp-json\/wp\/v2\/media\/19997"}],"wp:attachment":[{"href":"https:\/\/afpakmachine.com\/nl\/wp-json\/wp\/v2\/media?parent=20006"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/afpakmachine.com\/nl\/wp-json\/wp\/v2\/categories?post=20006"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/afpakmachine.com\/nl\/wp-json\/wp\/v2\/tags?post=20006"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}