These works may take you several hours.<\/p>\n\n\n\n What should we do before powering on the machine is assemble each component to the main machine.<\/p>\n\n\n\n First, arrange a forklift to remove the K cup filling machine from the wooden box and place it in a proper position.<\/p>\n\n\n\n Then, follow the initial installation instructions(usually a video made by the manufacturer) to assemble all the parts to the main machine one by one.<\/p>\n\n\n\n (Such as the output conveyor belt or vibrating empty capsule sorter.)<\/p>\n\n\n\n Then, plug in the power supply (pay attention to whether the plug matches your local jack).<\/p>\n\n\n\n As for the nitrogen generator and air compressor, assemble them, connect them to the main machine and plug in their own power supply.<\/p>\n\n\n\n Run the air compressor and freeze dryer for several minutes and then confirm from the pressure indicator that the compressed air reached the proper pressure(0.6~0.8MPa).<\/p>\n\n\n\n (The nitrogen generator can be left on this time.)<\/p>\n\n\n\n You need to use a suitable air switch according to the rated power of the machine.<\/p>\n\n\n\n Power on K cup filling machine(turn on the power switch and pressure reducing valve on the machine) and confirm lighting inside the machine with no alarms.<\/p>\n\n\n\n Check inside the machine, confirm that every functions are in their positions and there are space between each function and the table.<\/p>\n\n\n\n This check is to ensure the table is not stuck.<\/p>\n\n\n\n Confirm from the pressure reducing valves that the compressed air reached the proper pressure(0.6MPa around).<\/p>\n\n\n\n![\"\"](\"https:\/\/afpakmachine.com\/wp-content\/uploads\/2023\/03\/Preparation-Before-Rotary-Coffee-Capsule-Filling-Machine-Real-Production.png\")
<\/figure>\n\n\n\nBefore the power on<\/h2>\n\n\n\n
Before trial production<\/h2>\n\n\n\n