Complete cartoning
Top-Load Cartoning for Wraparound Retail Packs
The YM20 is built for coffee roasters, private-label producers and contract packers who already fill and seal Nespresso Original capsules and want boxed retail packs automatically. The YM20 groups sealed capsules, loads them from above and seals the carton flaps with hot-melt adhesive.
Built around your layout. Choose a 4 × 2 + 2, 5 × 2 or custom capsule pattern when specifying the machine. Each machine is built for the selected pattern.

YM20 Highlights
Capsules In. Cartons Out.
Speed
Up to 20 cartons a minute.
Set the cartoner between 12 and 20 cartons/min. Sustained output depends on capsule supply and pack count.
20

Capsules
Built for Nespresso Original.
Aluminium, plastic and compostable. Other capsule types can be built to order.

Layouts
Your pattern, 1 to 5 layers.
4 × 2 + 2, 5 × 2, or a custom layout. One layout per machine.

Multi-layer
Dividers and inserts, placed for you.
Automatic placement is configured around the carton and capsule arrangement.

Integration
Plugs into your filling line.
Works with fillers rated 200–300 capsules/min. An infeed buffer absorbs short gaps.

Quality
Stops the moment a capsule is missing.
Missing capsules are detected continuously. The machine alarms and stops straight away, so a short carton is caught at the source.

The Details That Matter
2
Operators per shift
Loading included.
20 min
Carton size changeover
Mainly the forming section and blank holder.
350 gsm
Wraparound carton board
Formed from a flat blank, closed with hot melt.
Schneider
Electrical components
Schneider and Airtac throughout.
Laser
Date and code marking
Optional, on the carton.
CE
Certified
2-year mechanical and 1-year electrical warranty.
Nordson
Hot-melt unit
A common brand, easy to source locally.

Machine Design Details
Machine Gallery
Follow the capsules from the infeed to the sealed carton.
Capsule infeed and buffer
Sealed capsules enter single file, lids down, and wait in the infeed lanes.
Capsule grouping
Capsules are turned and grouped into the specified pattern.
Grouping area
The grouping area sets the layout and lid direction for each layer.
Divider placement
In multi-layer packs, a divider is placed over each capsule layer.
Top loading
Grouped capsules are loaded into the formed carton from above.
Missing-capsule sensors
Sensors check the capsule rows. A missing capsule stops the machine.
Hot-melt glue head
A Nordson hot-melt unit glues the carton flaps.
Promo card magazine
Optional magazine that holds the promotional cards.
Promo card pick and place
Optional unit that places the card into the carton before closing.
YM20 machine overview
Alternate view of the cartoner.
Machine Demonstration
Machine Video
Watch the YM20 in action.
Automatic Production Process
How the YM20 Works
Receive and buffer
Sealed capsules come in single file, lids down. A buffer absorbs short gaps between your filler and the cartoner.
Orient and group
The machine turns and groups the capsules into your pattern, with the right lid direction.
Form the carton
A flat blank is picked up and formed.
Top load
Grouped capsules are loaded from above. Configured divider and insert feeders place them during the loading sequence.
Close and seal
Flaps are folded and glued with hot melt, then the finished carton is discharged.
Carton Styles & Capsule Layouts
Your Capsules, Packed for Retail
You decide how the capsules look when the customer opens the box. We build the machine around your capsule, lid direction and number of capsules per layer. Each machine is built for one layout. If you sell two layouts, you need two machines. The layouts below are examples. We can build the machine for other arrangements as well.
5 × 2 alternating
Two rows of five per layer, lids alternating face up and face down. Comes as 10 capsules in one layer, or 20 in two layers with a divider between them. The 20-capsule example measures 143 × 66 × 62 mm (L × W × H).
4 × 2 + 2
Each layer has two groups of five: one lid-up in the centre, four lid-down around it. Ten capsules per layer, in one to five layers. The examples here are 10, 20 and 30 capsules. In the 151 × 77 mm family, the 10- and 30-capsule cartons share the same footprint and differ only in height, from 32 mm to 93 mm.
5 × 2
10 capsules in two rows of five, all facing the same way.
5 × 2 alternating
Lids alternate face up and face down.
4 × 2 + 2
Two groups of five per layer: one capsule lid-up in the centre, four lid-down around it. A divider separates the layers.
5 × 2 alternating, two layers
20 capsules with a divider between the layers. Carton 143 × 66 × 62 mm (L × W × H).
4 × 2 + 2, two and three layers
Two-layer pack (top) and three-layer pack (bottom), with dividers between the layers.
| Pack | Layout | Layers | Carton size (L × W × H) |
|---|---|---|---|
| 10 capsules | 4 × 2 + 2 | 1 | 151 × 77 × 32 mm |
| 20 capsules | 5 × 2 alternating | 2 | 143 × 66 × 62 mm |
| 30 capsules | 4 × 2 + 2 | 3 | 151 × 77 × 93 mm |
Carton board is 350 gsm. Have a different carton or layout? Send us your carton size and a capsule sample, and we will build the machine around it.
Line Selection
Connecting to Your Filling Line
The YM20 works with filling and sealing machines rated at 200–300 capsules per minute. Capsules must reach the inlet in single file, lids down. If your filler discharges differently, tell us and we will look at the transfer.
The machine itself can run up to 20 cartons a minute. What you get depends on how fast your filler can feed it: capsules per carton × cartons per minute = capsules per minute you need to supply.
| Capsules per carton | Needed at 12 cartons/min | Needed at 20 cartons/min |
|---|---|---|
| 10 | 120 | 200 |
| 20 | 240 | 400 |
| 30 | 360 | 600 |
At a sustained infeed of 300 capsules/min, the capsule supply supports 15 cartons/min for 20-capsule packs. A 30-capsule pack requires 360 capsules/min to sustain 12 cartons/min. The table shows required infeed, calculated from pack count and selected carton speed.
| Standard | Optional |
|---|---|
| Automatic carton forming, top loading and hot-melt closing | Laser date and code marking |
| Infeed buffer and missing-capsule detection | Automatic promotional card insertion |
| Automatic layer dividers and inserts, depending on pack design | Custom capsule types and layouts |
Configure Your Line
Optional Functions
Laser date and code marking
Mark each carton with a production date or other specified information.
Automatic promotional card insertion
Cards are picked from a magazine and placed inside the carton before it closes.
Technical Data
Technical Specifications
| Parameter | YM20 |
|---|---|
| Carton type | Wraparound retail carton, formed from flat blank, 350 gsm board |
| Speed | 12–20 cartons/min, adjustable. Actual speed depends on your filler’s output |
| Capsules | Nespresso Original, aluminium / plastic / compostable. Other types on request |
| Pack counts | 10 capsules per layer, 1 to 5 layers (other counts on request) |
| Layouts | 5 × 2 alternating, 4 × 2 + 2, or custom. One layout per machine |
| Carton size | Adjustable. Minimum 5 × 5 × 5 cm, maximum 50 × 50 × 50 cm |
| Loading / closing | Automatic top loading / hot-melt glue (Nordson) |
| Capsule infeed | Single file, lids down. Buffer included |
| Changeover | About 20 minutes to change carton size, mainly at the forming section and blank holder |
| Missing capsules | Detected. The machine stops immediately and sounds an alarm. It does not reject |
| Other alarms | Material and blank shortage |
| Operators | 2 per shift, including loading |
| Dimensions | 5 × 4.5 × 2 m (L × W × H), including the link conveyor to the filler |
| Weight | 1,500 kg |
| Power | 3-phase 380 V (other voltages on request), 6 kW |
| Compressed air | 0.8 MPa, 1.5 m³/h |
| Electrical components | Schneider electrical components, Airtac pneumatic components |
| Certification | CE |
| Warranty | Electrical 1 year, mechanical structure 2 years |
| Lead time | About 3 months |
Service & Buying
From Sample to Production
Installation and training
We install and commission the machine at your site, usually about one week. This is a paid service, and we confirm the fee when we quote.
How buying works
1. You settle your pack format: capsule layout, count per carton, carton size.
2. We go through the machine requirements and details with you.
3. We confirm the site requirements: space, power, air. Lead time is about 3 months from there.
FAQ
Frequently Asked Questions
Can one machine run different carton sizes?
Yes, within the size range set up for your machine. Changeover takes about 20 minutes. The 10- and 30-capsule cartons above use the same 4 × 2 + 2 layout and share a base, so they run on one machine and differ only in height.
Can one machine run different capsule layouts?
No. Each layout needs its own machine. If you sell a 5 × 2 pack and a 4 × 2 + 2 pack, tell us up front and we will quote both.
Can you build it for my capsule layout?
Send a capsule sample plus a drawing or photo showing capsules per layer, lid direction and number of layers. We will tell you how we would handle it.
Can I connect it to the filler I already have?
Usually, as long as capsules reach our inlet in single file with lids down. Send your discharge conveyor layout and the real output of the filler, not the nameplate speed, and we will check the match.
Can it add dividers and promo cards?
Dividers and inserts, yes, built into the pack design. The promo card feeder is an option.
What happens if a carton comes up short?
The machine checks for missing capsules continuously. When a missing capsule is detected, the machine stops and sounds an alarm. The operator clears the issue before restarting.
Can I get replacement parts locally?
The machine uses Schneider electrical components, Airtac pneumatic components and a Nordson hot-melt unit. Contact AFPAK with the part number to confirm a replacement.
Start Your Project
Request Your YM20 Quote
Send us the details below and we will come back with a proposal.
- • Capsule sample
- • Carton dieline or a sample carton
- • Capsules per carton and the layout you want
- • If connecting to an existing line: the filler’s real output and a photo or drawing of its discharge conveyor







